25
When completed, you can see detailed information about the RAID array in the DISK/VOLUME
INFORMATION section, including the RAID level, stripe block size, array name, and array capacity, etc.
To exit the RAID BIOS utility, press Esc or select 4. Exit in MAIN MENU.
Now, you can start to install the SATA RAID/AHCI driver and operating system.
Delete RAID Volume
To delete a RAID array, select Delete RAID Volume in MAIN MENU and press Enter. In the DELETE
VOLUME MENU section, use the up or down arrow key to select the array to be deleted and press
<Delete>.
When prompted to confirm your selection, press <Y> to confirm or <N> to abort.
For the user’s manual of Intel RSTe, please go to the following folder of Driver DVD:
Intel RSTe: Manual, g40440_005_rste_swug_r1_5
To Next Page
Loading...