NEC NC900C - Page 90

90
Appendix
1. Gently lift up the positive (+) terminal that is retaining the battery so that you can remove the
battery.
“+” terminal
2. Insert a non-conductive tool or your nger into the negative side of the socket.
3. Remove the battery by lifting it out.
NOTE
If you are using a tool to remove the battery, ensure that you have securely inserted the tool between the battery
and the socket before removing the battery. Furthermore, take care to ensure that the tool you use to remove the
battery does not touch the ICP board. There is a risk of damaging the ICP board.