EasyManuals Logo

NEC NC900C Installation Manual

NEC NC900C
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
91
Appendix
4
Fit the new battery.
1. Check the model number of the new battery.
Model number: BR2330 (Panasonic)
2. Insert the battery into the socket ensuring that the positive (+) side of the battery is upwards.
Battery
“+” terminal
3. Ensure that the positive (+) terminal of the socket is pressing down on the positive (+) sur-
face of the battery.
Socket
“+” terminal
Battery
“+” terminal
5
Mount the ICP board into the projector.
1. Insert the ICP board in directly following the guides.
2. Tighten and fasten the knurled screws (2 locations) on the front of the ICP board.
6
Attach the option board that had been mounted in slot A and the slot B blocking panel.
Attach by performing the removal procedure in reverse.
Mount the board and blocking panel in the order slot A then slot B.

Table of Contents

Other manuals for NEC NC900C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC NC900C and is the answer not in the manual?

NEC NC900C Specifications

General IconGeneral
BrandNEC
ModelNC900C
CategoryProjector
LanguageEnglish

Related product manuals