CHAPTER 1 MAINTENANCE SERVICE FEATURES
– 100 – NWA-008847-001 Rev.3.0
a6ch1001.fm
(2) To confirm whether the call logs is collected in the MP or to clear logs, do the following
programming.
[Series 3500 software required]
(3) To collect the fault logs manually, do the following programming.
[Series 3500 software required]
DESCRIPTION DATA
Display the call logs
that are collected in the
MP or clear the logs.
•
(1)
(2)
Y=6
01: Confirmation of call log collection/log
clear
0 : Logs are not collected
1 : Logs are collected
CCC: Log clear
DESCRIPTION DATA
Specify the terminals/IP-PAD to collect fault
logs.
NOTE: When reading this data, second data
1 is displayed normally.
•
(1)
(2)
Y=6
11: Specification of fault log collection ter-
minal/IP-PAD
X-XXXXXXXX: D
term
IP Station No.
DD000-DD255: IP-PAD Channel No.
EEAXXX Z:
XXX: 000-255: CS No. of IP-CS
Z : 0: D Channel
1-3: B Channel 0-2
START
CMEA
END
START
CMEA
END
OCTOBER/14/2005
VoIP LOG COLLECTION
To Next Page
Loading...
