5-84 Installing Options
1. Remove the left side cover (see “Removing the
Minitower Side Covers”).
2. From inside the chassis, squeeze the two front panel
locking tabs in the lower left and right corners (see the
following figure).
3. Carefully push the tabs out until they release the bottom
of the front panel.
4. Grasp the side edges of the front panel. Carefully pull the
front panel away from the system unit until the four plugs
release.
Removing the front panel — minitower
A
– Front Panel
C
– Locking Tab (1 of 2)
B
– Pop-out Plug (1 of 4)
D
– Bay Cover
To Next Page
Loading...
