NEC PX1004UL-WH - Page 132

115
5. Using On-Screen Menu
[3DCAUTIONMESSAGE]
Thisselectswhethertodisplayacautionmessageornotwhenswitchingtoa3Dvideo.
ThedefaultconditionwhenshippedfromthefactoryisON.
OFF ������������������������ The 3D caution message screen will not be displayed�
ON ������������������������� The 3D caution message screen will be displayed when switching to a 3D video� Press the ENTER button
to cancel the message�
• Themessagewilldisappearautomaticallyafter60secondsorwhenotherbuttonsarepressed.Ifitdisap-
pears automatically, the 3D caution message will be displayed again when switching to a 3D video�
SelectingMenuDisplayTime[DISPLAYTIME]
Thisoptionallowsyoutoselecthowlongtheprojectorwaitsafterthelasttouchofabuttontoturnoffthemenu.The
presetchoicesare[MANUAL],[AUTO5SEC],[AUTO15SEC],and[AUTO45SEC].The[AUTO45SEC]isthe
factory preset.
[MENU(2)]
[MENUANGLE]
Selectthedirectionfordisplayingthemenu.
[MENUPOSITION]
Shiftthemenudisplayingposition.
HORISONTAL POSITION �����Shift the menu in the horizontal directions�
VERTICAL POSITION ����������Shift the menu in the vertical directions�
RESET ���������������������������������Reset the menu displaying position to the default factory setting (the screen center)�
TIP
• Oncetheprojectorispoweredoff,themenudisplayingpositionwillresettothedefaultfactorysetting.
• Inputterminalandmessagedisplayingpositionarenotinuencedbythe[MENUPOSITION].