NEC PX1004UL-WH - Using the Power Cord Stopper

16
2. Projecting an Image (Basic Operation)
Using the Power Cord Stopper
TopreventthepowercordfromaccidentlyremovingfromtheACINoftheprojector,attachthepowercordstopper
to clamp the power cord.
CAUTION
• Topreventthepowercordfromcomingloose,makesurethatalltheprongsofthepowercordarefullyinserted
intotheACINterminaloftheprojectorbeforeusingthepowercordstoppertoxthepowercord.Aloose
contactofthepowercordmaycauseareorelectricshock.
Attaching the power cord stopper
1. Raise up the power cord stopper and lay it over the power cord.
Powercord
stopper
• Forreleasingthestopper,raiseupthestopperandlayitdownto
theoppositeside.