NEC PX1004UL-WH - [Installation(2)]

117
5. Using On-Screen Menu
SelectingAspectRatioandPositionforScreen[SCREENTYPE]
Screentype Setstheaspectratiooftheprojectionscreen.
FREE Theratioofthepanelisselected.Selectthiswhenprojectingmulti-screen
and17:9screen(2K).
4:3screen Forascreenwitha4:3aspectratio
16:9 screen Forascreenwitha16:9aspectratio
16:10 screen Forascreenwitha16:10aspectratio
NOTE:
•
Afterchangingthescreentype,checkthesettingof[ASPECTRATIO]inthemenu.(→ page 98)
UsingtheWallColorCorrection[WALLCOLOR]
Thisfunctionallowsforquickadaptivecolorcorrectioninapplicationswherethescreenmaterialisnotwhite.
SelectingFanMode[FANMODE]
FanModeisusedtosetthespeedoftheinternalcoolingfan.
MODE �������������������� Select mode for fan speed: AUTO, MIDDLE, and HIGH�
AUTO: Standard mode supplying superior quietness�
MIDDLE: Mode offering well-balanced quietness and parts life�
HIGH: Output the maximum cooling power for prolong life of parts�
• Ifyouusetheprojectorcontinuouslyforseveraldays,pleasemakesuretoset[HIGH]for[FANMODE].
NOTE:
• Yoursettingwillnotbeaffectedevenwhen[RESET]isdonefromthemenu.