NEC PX1004UL-WH - ❺ Menu Descriptions & Functions [ADJUST]; [Picture]

90
5. Using On-Screen Menu
EnteringthecurrentlyprojectedsignalintotheEntryList[ (STORE)]
1. Press the ▲ or ▼ button to select any number.
2. Press the ◀ or ▶buttontoselect[ (STORE)]andpresstheENTERbutton.
CallingupasignalfromtheEntryList[ (LOAD)]
Press the ▲ or ▼buttontoselectasignalandpresstheENTERbutton.
EditingasignalfromtheEntryList[ (EDIT)]
1. Press the ▲ or ▼ button to select a signal you wish to edit.
2. Press the ◀, ▶, ▲, or ▼buttontoselect[ (EDIT)]andpresstheENTERbutton.
 TheEditwindowwillbedisplayed.
SOURCENAME Enterasignalname.Upto18alphanumericcharacterscanbeused.
INPUT Theinputterminalcanbechanged.SwitchingbetweenHDMI/DisplayPort/BNC/BNC(CV)/
BNC(Y/C)/Computer/HDBaseT/SLOTispossible.
LOCK
Setsothattheselectedsignalcannotbedeletedwhen[ (ALLDELETE)]isexecuted.
ThechangesmadeafterLOCKexecutioncannotbesaved.
SKIP
Setsothattheselectedsignalwillbeskippedduringautosearch.
3. Settheaboveitemsandselect[OK]andpresstheENTERbutton.
NOTE: The input terminal cannot be changed to the currently projected signal.