NEC PX1004UL-WH - ❹ Freezing a Picture

37
3. Convenient Features
❹ Shift the On-Screen Menu displaying position
1. Press the MENU button.
 TheOn-ScreenMenuwillbedisplayedon.
2. Move the cursor by the ▶buttontothe[SETUP]andthenpresstheENTERbutton.
 Thecursorwillmovetothe[MENU1].
3. Move the cursor by the ▶buttontothe[MENU2].
4. Move the cursor by the ▼buttontothe[MENUPOSITION]andthenpresstheENTER.
 TheOn-ScreenMenuwillgoesintotheMENUPOSITIONsetupscreen.
5. MovethecursoreitherTO[HORIZONTALPOSITION]or[VERTICALPOSITION]bypressing▼ or ▲ button
and then press ◀/▶
buttontoshifttheOn-ScreenMenu.
 FornishingthesettingontheOn-ScreenMenu,presstheMENUbuttonontheremotecontrol.
TIP:
• Oncetheprojectorispoweredoff,theOn-ScreenMenudisplayingpositionwillberesettothedefaultfactorysettingposition.
• Thisfunctiondoesnotinuencetothedisplaypositionofinputterminalinformationandmessage.
❺ Freezing a Picture
HoldtheCTLbuttonandpressthePIP/FREEZEbuttontofreezeapicture.
Pressagaintoresumemotion.
NOTE:Theimageisfrozenbuttheoriginalvideoisstillplayingahead.