NEC PX1004UL-WH - Adjusting the Vertical Position of a Projected Image (Lens Shift)

23
2. Projecting an Image (Basic Operation)
Adjusting the vertical position of a projected image (Lens shift)
CAUTION
• Performtheadjustmentfrombehindorfromthesideoftheprojector.Performingadjustmentfromthefrontcould
exposeyoureyestostronglightwhichcouldinjurethem.
• Keephandsawayfromthelensmountingportionwhileperformingalensshift.Failuretodosocouldresultin
ngersbeingpinchedbythemovinglens.
NOTE:
• ThelensshiftfunctionisnotavailableontheprojectorwitheitherNP16FLorNP39MLlensinstalled.
 ForusingNP16FL,setbackthelenstothehomeposition.
 ForusingNP39ML,select[SETUP]→[INSTALLATION(2)]→[LENSPOSITION]→[TYPE]ontheonscreenmenu,thelenswill
bemovedtotheappropriatepositionautomatically.
• Shiftingthelenstothemaximuminobliqueanglewillcausetheedgesoftheimagetobecomedarkorwillcausedarkshadows.
Adjusting with buttons on the cabinet
1. Press the LENS SHIFT/HOME POSITION button.
 The[LENSSHIFT]screenwillbedisplayed.