NEC PX1004UL-WH - ❺ Adjusting the Picture Size and Position

22
2. Projecting an Image (Basic Operation)
❺ Adjusting the Picture Size and Position
Usethelensshiftdial,theadjustabletiltfoot,thezoomringandthefocusringtoadjustthepicturesizeandposition.
Inthischapterdrawingsandcablesareomittedforclarity.
Adjustingtheprojectedimage’sverticalandhorizontal
position
[Lensshift]
(→page23)
Adjustingthefocus
[Focus]
(→page26)
Finelyadjustingthesizeofanimage
[Zoom]
(→page31)
Adjustingtheprojectedimage’sheightandhorizontaltilt
[Tiltfoot]*¹
(→page32)
NOTE*
1
:Adjusttheprojectedimage’sheightusingthetiltfootwhenyouwanttoprojecttheimageatapositionhigherthanthe
lens shift adjustment range.
TIP:
• Built-intestpatternscanbeconvenientlyusedforadjustingthepicturesizeandposition.(→ page 88)
 ApressoftheTESTbuttonwilldisplaythetestpattern.The◀ or ▶ button can select one test pattern. To close the test pattern,
change the source to another.