NEC PX1004UL-WH - Stacking Projectors

156
6. Installation and Connections
Design and manufacturing conditions for the stand
Pleasehireaninstallationserviceprovider(forafee)forthedesignandmanufactureofacustomizedstandtobe
usedforportraitprojection.Pleaseensurethatthedesigncomplieswiththefollowingconditions:
• Thereare3ventilationholesatthebottomoftheprojector.Theseholesshouldremainunobstructed.
• Usethe6screwholesatthebackoftheprojectortosecureittothestand.
 Screwholecenterdimension:300×300(pitch=150)mm
 Screwholedimensionontheprojector:M4withthemaximumdepth16mm
 4ofthelegscanbeunscrewedforremoval.
• Horizontaladjustmentmechanism(forexample,boltsandnutsin4places)
• Pleasedesignthestandsothatitdoesnoteasilytoppleover.
Reference drawings
* Thedrawingshowingthedimensionalrequirementsisnotanactualstanddesigndrawing.
300
150 150124.5
[Side View][Front View]
(Unit: mm)
Horizontal adjuster
Air exhaust
6 - M4 bolt
Air intakeAir intake
Air intake