NEC PX1004UL-WH - Page 172

155
6. Installation and Connections
Portrait projection (vertical orientation)
Thisprojectorcanbeinstalledverticallytodisplaycomputerimagesin
portrait orientation.
Themenudisplayingpositioncanbeshiftedbyselectingthe[SETUP]→
[MENU(2)]→[MENUANGLE].
Precautions during installation
• Pleasedonotinstalltheprojectorinaverticalorientationontopoftheoorortableonitsown.Ifnot,theprojec-
tormayfallover,resultingininjury,damageormalfunction.
• Astandforsupportingtheprojectorneedstobemadeforthispurposetokeepintakeairowsecurelyand
preventivemeasureoffallingover.Thestandmustbedesignedsuchthatthecenterofgravityoftheprojector
islocatedwellwithinthelegsofthestand.Ifnot,theprojectormayfalloverandresultininjury,damageand
malfunction.
• Iftheprojectorisinstalledonwhichtheintakeventfacingdown,opticalpartlifemaybeshorten.