NEC PX1004UL-WH - To Store Your Adjusted Values in [REF. LENS MEMORY]

59
3. Convenient Features
RESET Resetselected[REF.LENSMEMORY]fortheselected[PROFILE]tothedefault
factorysettings.
LOADBY
SIGNAL
OFF Ifinputsignalisswitched,thelenswillnotshifttothelesshift,zoomandfocusval-
uesfortheselected[PROFILE]number.
ON Ifinputsignalisswitched,thelenswillshifttothelensshift,zoomandfocusvalues
fortheselected[PROFILE]number.
Ifnoadjustedvalueshavebeenstoredto[LENSMEMORY],thelenswillapply
[REF.LENSMEMORY]adjustedvalues.Alternatively,ifnoadjustedvalueshave
beenstoredto[REF.LENSMEMORY],theunitwillreturntothedefaultfactoryset-
tings.
FORCED
MUTE
OFF Notturnofftheimageduringlesshift.
ON Turnofftheimageduringlesshift.
•SHUTTERSETTINGS
POWERON
SHUTTER
OPEN Whenthepoweristurnedon,thelightsourceturnsonandthepictureisprojected.
CLOSE Whenthepoweristurnedon,thelightsourcedoesnotturnon.
PICTURE
MUTESHUT-
TER
OPEN Thelightsourceremainstoonwhenthepictureisturnedoffforswitchingtheinput
terminals.
CLOSE
Thelightsourceturnsoffwhenthepictureisturnedoffforswitchingtheinputtermi-
nals.
FADEINTIME SethowlongthelightwilltaketofadeinafterpressingtheSHUTTERbutton.
FADEOUTTIME SethowlongthelightwilltaketofadeoutafterpressingtheSHUTTTERbutton.
TIP:TheCRESTRONsettingsarerequiredonlyforusewithCRESTRONROOMVIEW.
Formoreinformation,visithttp://www.crestron.com