NEC PX1004UL-WH - Page 77

60
3. Convenient Features
⓬ Storing Changes for Lens Shift, Zoom, and Focus [LENS
MEMORY]
TheadjustedvaluescanbestoredinprojectormemorywhenusingtheLENSSHIFT,ZOOMandFOCUSbuttons
oftheprojector.Adjustedvaluescanbeappliedtothesignalyouselected.Thiswilleliminatetheneedtoadjustlens
shift,focus,andzoomatthetimeofsourceselection.Therearetwowaystosaveadjustedvaluesforlensshift,
zoom,andfocus.
Functionname Description page
REF.LENSMEMORY Adjustedvaluescommontoallinputsignals.Atthetimeofinstallation,
twokindsofadjustedvaluescanbestored.
Ifnoadjustedvaluesarestoredin[LENSMEMORY],adjustedvalues
fromtheselectedprole([REF.LENSMEMORY])willbeappliedfor
lens adjustment.
→page120
LENSMEMORY Adjustedvaluesforeachinputsignal.
Usetheadjustedvaluesforthesignalwithadifferentaspectratioor
resolution.Theadjustedvaluescanbeappliedatthetimeofsource
selection.
→page103
NOTE:
• ForusingthelensunitNP16FL,NP17ZL,NP18ZL,NP19ZL,NP20ZL,NP21ZL,andNP31ZL,besuretocarryout[LENSCALIBRA-
TION]afterreplacingthelensunit.(→ page 18, 120)
• Forthelensunit,NP16FL,thestorablevalueas[LENSMEMORY]featureisfor[FOCUS]only.
• The[LENSMEMORY]featureisnotavailableforthelensunit,NP39ML.