NEC PX1004UL-WH - Page 19

2
1. Introduction
Attaching/Removing the Dust Cap
To remove the dust cap from the projector, push the
tongueatthetopleftoutwardandpulltheknobatthe
center of the cap.
Toattachthedustcaptotheprojector,locatethecatch
on the lower end of the dust cap and place it into the
openingoftheprojectorwiththepointofatrianglemark
(▽)facingdownward(①inthegurebelow),andthen
pushtheupperendofthedustcapagainsttheprojec-
tortoplacethecatchesintotheslotwhileclutchingthe
handle(②inthegurebelow).