NEC PX1004UL-WH - Page 195

178
8. Appendix
❽ Troubleshooting
Thissectionhelpsyouresolveproblemsyoumayencounterwhilesettinguporusingtheprojector.
Indicator Messages
POWER Indicator
Indicatordisplay Projector status Procedure
Off Power is off. –
Flashing
Blue(shortashes) Preparingtoturnpoweron Wait a while.
Blue(longashes) Offtimer(enabled)
Programtimer(offtimeenabled)
–
Orange(shortashes) Projectorcooling Wait a while.
Orange(longashes) Programtimer(ontimeenabled) –
Lit Blue Power on –
Red Standbymode(NORMAL) –
Orange
Standbymode(NETWORKSTANDBY) –
STATUS Indicator
Indicatordisplay Projector status Procedure
Off
Noproblem,orSTANDBYMODE-
“NETWORKSTANDBY”
–
Flashing
Red(onceper
cycle)
Lensisnotxedon. Checkxingconditionsofthelens.
Red(fourtimes
percycle)
Fanproblem Thecoolingfanhasstoppedturning.ContactanNEC
projector customer support center for repairs.
Green(twiceper
cycle)
Performingthelenscalibration —
Orange(once
percycle)
Networkconict Itisnotpossibletoconnecttheprojector’sbuilt-in
LANandwirelessLANsimultaneouslytothesame
network.Toconnecttheprojector’sbuilt-inLANand
wirelessLANsimultaneously,connectthemtodiffer-
entnetworks.
IntheSTANDBYstate,thestatusindicatordoesnot
ashinOrangeevenifthenetworkconictionisoc-
cured.
Orange(twice
percycle)
Troubleoccurrencewhilethelens
shift is functioned as accidentally cut-
tingoffthepowersupply.
Carryoutthelenscalibration
Lit Green STANDBYMODEinsleepmode* –
Orange Button has been pressed while pro-
jectorisinkeylockmode
Theprojector’skeysarelocked.Thesettingmustbe
canceledtooperatetheprojector.(→Page126)
Projector’sIDnumberandremote
control’sIDnumberdonotmatch
CheckthecontrolIDs.(→Pages127)
* Sleepmodereferstothestatewherebythefunctionalrestrictionsduetothestandbymodesettingareremoved.