NEC PX1004UL-WH - Page 61

44
3. Convenient Features
 Theconrmationscreenisdisplayed.
13 . Press the ◀ or ▶buttontohighlightthe[OK]andpresstheENTERbutton.
 Thiscompletesthe[CORNERSTONE]correction.
• Returningtothe[CORNERSTONE]screen,select[CANCEL]andpresstheENTERbutton.
NOTE:
• Eveniftheinstallationangleischangedwhentheprojectoristurnedonagain,thecorrectionvaluesintheprevioustimehasbeen
maintained.
• Carryouteitheroneofthefollowingactionstocleartheadjustmentvalueof[CORNERSTONE].
• InStep12,select[RESET]andthenpresstheENTERbutton.
• Inthestate[CORNERSTONE]hasbeenselectedfor[MODE]inthe[GEOMETRICCORRECTION]:
• Pressthe3DREFORMbuttonfor2ormoreseconds.
• Run[GEOMETRICCORRECTION]→[RESET]intheon-screenmenu.
• UsingCORNERSTONEcorrectioncancausetheimagetobeslightlyblurredbecausethecorrectionismadeelectronically.