NEC PX1004UL-WH - Page 92

4. Multi-Screen Projection
75
Preparation:
• Turnontheprojectoranddisplayasignal.
• Inordertouseoneremotecontrolforperformingsettingsandadjustmentstosomeprojectors,set[ENABLE]for
theCONTROLIDandassignIDforeachprojector,andthenperformsettingsandadjustmentstoeach.
Setting the overlap of projection screens
①
Enable[EDGEBLENDING].
1. Press the MENU button.
 Themenuwillbedisplayed.
2. Select[EDGEBLENDING].
 The[EDGEBLENDING]screenwillbedisplayed.Alignthecursorwith[MODE]andthenpresstheENTERbut-
ton.Themodescreenwillbedisplayed.
3. Select[MODE]→[ON]andpresstheENTERbutton.
 ThisenablestheEdgeBlendingfunction.Thefollowingmenuitemsareavailable:
 [TOP],[BOTTOM],[LEFT],[RIGHT],[BLACKLEVEL],and[BLENDCURVE]
4. Select[RIGHT]forProjectorAand[LEFT]forProjectorB.
 PresstheENTERbutton.
 Thefollowingitemsareavailable:
 [CONTROL],[MARKER],[RANGE],and[POSITION]