NEC SL1100 - Page 265

3. Set how long the call will ring in the Department Group before overflow occurs.
Program
Number
Program Name Description
24-02-04 Transfer Recall Time Set how long (0 ~ 64800 seconds) the Unscreened Transfer from
the InMail Automated Attendant rings in the Department Group be-
fore overflow occurs.
By default, this interval is 30 seconds.
4. Set up the Department Group Mailbox.
Program
Number
Program Name Description
47-03-02 Mailbox Number The Group Mailbox number must be the same as the Department
Group master number.
By default, no Group Mailbox numbers are assigned.
47-03-03 Mailbox Type Assign the Group Mailbox category (2 = Routing, 1 = Subscriber, 0
= None).
By default, the Group Mailbox type is 1 (Subscriber).
5. Set up the options for the Group Mailbox used for Department Group overflow.
If you entered 2 (Call Routing) for 47-03-03 Group Mailbox Type:
• 47-07 InMail Routing Mailbox Options
• 47-08 Routing Mailbox Call Routing Options
• 47-09 Announcement Mailbox Options
If you entered 1 (Subscriber) for 47-03-03 Group Mailbox Type:
• 47-06-01 Number of Messages
• 47-06-02 Message Playback
• 47-06-03 Auto Erase/Save of Messages
• 47-06-05 Recording Conversation Beep (Rec Conv Beep)
• 47-06-06 Message Waiting Lamp (Update MW Lamp)
• 47-06-07 Auto Attendant Direct to Voice Mail
• 47-06-08 Forced Unscreened Transfer (Forced UTRF)
• 47-06-09 Auto Time Stamp
• 47-06-10 System Administrator (System Admin)
• 47-06-11 Dialing Option
• 47-06-12 Next Call Routing Mailbox (Next CR Mbox)
ISSUE 3.5 SL1100
InMail Feature Manual 2-247
V