NEC SL1100 - Page 30

Routed Announcement Mailbox Routing
(If the outside caller routes to the Announcement Mailbox from a Call Routing Mailbox)
47-09-01 Next
Call Routing
Mailbox
47-09-02 Repeat
Count
47-09-03 Hang
Up After Action
1-32 (valid Call
Routing Mailbox)
x (x number of re-
peats)
0 = None
1 = Goodbye
2 = Silent
• If caller does not dial, they hear the announcement x
number of times and then route to the Next Call Routing
Mailbox.
• If the caller dials a digit during the announcement, they
route to the Next Call Routing Mailbox.
• If caller does not dial, they hear the announcement x
number of times and then InMail hangs up.
• If the caller dials a digit during the announcement, they
route to the Next Call Routing Mailbox.
Related Features
Automated Attendant on page 2-31
The Automated Attendant routes callers to an Announcement Mailbox.
Routing Mailbox on page 2-213
A Call Routing Mailbox (and the associated Dial Action Table) provides dialing options to Automated
Attendant callers.
Next Call Routing Mailbox on page 2-194
The Next Call Routing mailbox provides additional routing options to Announcement Mailbox callers.
System Administrator on page 2-229
The System Administrator records the Announcement Mailbox message.
Programming
1. Set up the Announcement Mailbox:
Program
Number
Program Name Description
47-07-02 Routing Mailbox Type (Mailbox
Type)
Enter 2 to make the Routing Mailbox an Announcement Mailbox.
By default, Routing Mailboxes 1 ~ 8 are Call Routing Mailboxes (1)
and Routing Mailboxes 9 ~ 32 are Announcement Mailboxes (2).
2. Record the Announcement Message:
See Operation below.
By default, no message is recorded.
SL1100 ISSUE 3.5
2-12
Announcement Mailbox
A