NEC SL1100 - Page 31

3. Hang up InMail after playing the Announcement Mailbox message (without providing additional
dialing options):
Program
Number
Program Name Description
47-09-03 Hang Up After
(HangUp)
Enter 1 (Goodbye) to have InMail play Goodbye to caller and hang
up after the announcement.
By default, this option is disabled (0).
4. Provide Announcement Mailbox callers with more dialing options (instead of hanging up):
Program
Number
Program Name Description
47-09-03 Hang Up After
(HangUp)
Enter 0 (None) to have InMail hang up after the announcement.
By default, this option is disabled (0).
Review Next Call Routing Mailbox on page 2-194 to set up addition-
al dialing options for Announcement Mailbox callers.
5. Repeat the Announcement Mailbox message while the caller listens:
Program
Number
Program Name Description
47-09-02 Repeat Count Enter the Repeat Count (0 ~ 10).
By default, this option is 0 (No Repeats).
6. Set the maximum length of the Announcement Mailbox message:
Program
Number
Program Name Description
47-01-03 Incoming Message Length
(Subs Msg Length)
Enter the maximum length of the Announcement Mailbox message
(1 ~ 4095 seconds).
By default, this interval is 120 seconds.
Operation
Recording an Announcement Mailbox Message
Log On to System Administrator's mailbox.
SA (72) Access System Administrator options.
[Not applicable]
A (2) Select Announcement Mailbox message.
[Annc]
Enter the Announcement Mailbox number.
L (5) Listen to current Announcement Mailbox message.
[Lstn]
# Exit listen mode.
R (7) Record a new Announcement Mailbox message.
[Rec]
ISSUE 3.5 SL1100
InMail Feature Manual 2-13
A