Program
Number
Program Name Description
47-01-04 Non-Subscriber Message
Length
(Mbox Msg Length)
This option sets the maximum message length (1 ~ 4095 seconds)
for Instruction Menus.
By default, this option is 120 seconds.
8. Enable or disable the ability of the Directory Dialing Mailbox to detect and route incoming faxes.
Program
Number
Program Name Description
47-15-07 Fax Detection Enter 1 to enable Fax Detection; 0 to disable. If enabled, when the
Directory Dialing Mailbox detects incoming fax CNG tone, it routes
the call to the fax extension specified in 47-01-06 Fax Extension.
See Fax Detection on page 2-96 for more.
By default, Fax Detection is disabled (0).
9. Enable the Directory Dialing Mailbox caller to dial 0 for other options or # to return to the
Automated Attendant.
Program
Number
Program Name Description
47-15-08 Next Call Routing Mailbox Assign a Next Call Routing Mailbox (1 ~ 32) to the Directory Dialing
Mailbox.
To remove an assignment, press Hold key.
Once assigned, dialing # returns to the Automated Attendant. Dial-
ing 0 follows the 0 action of the Next Call Routing Mailbox.
By default, no Next Call Routing Mailbox is assigned.
10. Enable Directory Dialing Mailbox to directly answer an outside call.
Make sure the active Answer Table uses the Call Routing Mailbox programmed as a Directory
Dialing Mailbox.
See Answer Table on page 2-19 for more.
By default, Answer Table 1 routes to Routing Mailbox 000, which is a Call Routing Mailbox.
11. Enable callers to access Directory Dialing from a Dial Action Table action.
Make sure you have an action in the active Dial Action Table that is a GOTO to the Directory
Dialing Mailbox.
See Dial Action Table on page 2-60 for more.
By default, no actions are assigned as a GOTO to a Directory Dialing Mailbox.
SL1100 ISSUE 3.5
2-68
Directory Dialing
D
To Next Page
Loading...
