EasyManua.ls Logo

NEC SL1100 - Page 87

NEC SL1100
288 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Use a Call Routing Mailbox for Directory Dialing
1. Set up the Directory Dialing Mailbox.
Program
Number
Program Name Description
47-03-02 Mailbox Number Enter the mailbox number for the Call Routing Mailbox. This number
must correspond to a Department Group pilot number set up in
11-07-01 Department Group Pilot Numbers.
When using a Call Routing Mailbox as an additional resource (for
example, as an extra Directory Dialing Mailbox), you can perform
the following actions:
Assign a pilot number to an unused Department Group in
11-07-01 Department Group Pilot Numbers.
Set up the Call Routing Mailbox in 47-03 using this pilot number.
When 47-03 programming is complete, remove the pilot number
assignment in 11-07-01 Department Group Pilot Numbers.
By default, no Call Routing Mailbox numbers are assigned.
47-03-03 Mailbox Type Enter 3 to make the selected Call Routing Mailbox a Directory Dial-
ing Mailbox.
By default, all Call Routing Mailboxes are set up as Call Routing
Mailboxes (1).
2. Set up the name programming and enter names.
Program
Number
Program Name Description
47-01-16 Name Format Determine how extension names should be entered in 15-01-01 Ex-
tension Name or via the telephone. The options are 0 (first name
followed by last name) or 1 (last name followed by first name).
By default, the system expects names to be entered as first name fol-
lowed by last name (0).
15-01-01 Extension Name Enter the name for each extension. The format you use should fol-
low the setting of 47-01-16 Name Format.
By default, all the Extensions are No Setting.
47-15-03 Name Match Select the portion of the extension name on which the Directory Di-
aling Mailbox should route. Enter 0 for first; 1 for last. This option al-
lows for dial-by-first-name and dial-by-last-name Directory Dialing.
For example, if 47-01-16 Name Format is 0 and the name in
15-01-01 Extension Name is entered as first name followed by last
name, enter 1 in this option to set up last name dialing.
By default, the Directory Dialing Mailbox routes on the first por-
tion of the name (0).
ISSUE 3.5 SL1100
InMail Feature Manual 2-69
D

Table of Contents

Other manuals for NEC SL1100

Related product manuals