EasyManua.ls Logo

NEC SL1100 - Page 89

NEC SL1100
288 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6. To change the amount of time Directory Dialing callers have to dial letters:
Program
Number
Program Name Description
47-15-06 Time Limit for Dialing Com-
mands
Enter the new timeout duration (0 ~ 99 seconds).
If the caller waits too long to dial, the Directory Dialing Message re-
peats.
By default, Directory Dialing callers have 5 seconds to dial letters.
7. To record a Directory Dialing Message:
Refer to Operation on page 2-72.
The Directory Dialing Message is the Instruction Menu for the Call Routing Mailbox programmed
as a Directory Dialing Mailbox.
By default (without a custom message recorded), the Directory Dialing Message is "Please enter one
or more letters of the person's name, then press the pound key."
Program
Number
Program Name Description
47-01-04 Outgoing Message Length
(Mbox Msg Length)
This option sets the maximum message length (1 ~ 4095 seconds)
for Instruction Menus.
By default, this option is 120 seconds.
8. Enable or disable the ability of the Directory Dialing Mailbox to detect and route incoming faxes.
Program
Number
Program Name Description
47-15-07 Fax Detection Enter 1 to enable Fax Detection; 0 to disable. If enabled, when the
Directory Dialing Mailbox detects incoming fax CNG tone, it routes
the call to the fax extension specified in 47-01-06 Fax Extension.
See Fax Detection on page 2-96 for more.
By default, Fax Detection is disabled (0).
9. Enable the Directory Dialing Mailbox caller to dial 0 for other options or # to return to the
Automated Attendant:
Program
Number
Program Name Description
47-15-08 Next Call Routing Mailbox Assign a Next Call Routing Mailbox (1 ~ 32) to the Directory Dialing
Mailbox.
To remove an assignment, press Flash key.
Once assigned, dialing # returns to the Automated Attendant. Dial-
ing 0 follows the 0 action of the Next Call Routing Mailbox.
By default, no Next Call Routing Mailbox is assigned.
10. Enable the Directory Dialing Mailbox to directly answer an outside call.
Make sure the active Answer Table uses the Call Routing Mailbox programmed as a Directory
Dialing Mailbox.
See Answer Table on page 2-19 for more.
By default, Answer Table 1 routes to Routing Mailbox 000, which is a Call Routing Mailbox.
ISSUE 3.5 SL1100
InMail Feature Manual 2-71
D

Table of Contents

Other manuals for NEC SL1100

Related product manuals