Issue 1.0 VM8000
2 - 8 Features
Return Call (with
Caller ID)
See Make Call on page 2-6 in this glossary. Voice Mail
Rotary Dial
Telephones
See Automatic Routing for Rotary Dial Callers on page 2-3 in this
glossary.
Automated
Attendant
Routing Mailbox Routing Mailboxes are used to route Automated Attendant calls. A
Routing Mailbox can be either an Announcement or Call Routing
Mailbox.
Automated
Attendant
Screened Transfer Similar to telephone system screened transfers in which the
transferring party controls the transfer.
After an Automated Attendant caller dials an extension, VM8000
InMail calls (screens) the destination extension to see if the transfer
can go through.
o If the destination is busy or in DND, the Automated Attendant doesn’t
extend the call and immediately provides the caller with additional
options.
o If the destination is available, the Automated Attendant rings it. If the
destination answers, the call goes through. If the destination doesn’t
answer within a preset interval, the Automated Attendant doesn’t extend
the call and provides the caller with additional options.
Also see Unscreened Transfer on page 2-9 in this glossary.
Automated
Attendant
Security Code An extension user’s mailbox can have a security code to protect the
mailbox from unauthorized access.
See Mailbox Security Code Delete on page 2-5 in this glossary.
Voice Mail
Select Listen Mode See Message Listen Mode on page 2-6 in this glossary. Voice Mail
Single Digit Dialing An Automated Attendant caller can press a single key to route to an
extension, route to another destination, or use an VM8000 InMail
feature.
Automated
Attendant
Subscriber Mailbox The mailbox type normally used for telephone system extensions. Voice Mail
System
Administrator
The extension user that has VM8000 InMail system administration
abilities.
Maintenance
System
Administrator
Mailbox
A Subscriber Mailbox option that enables the system administration
abilities.
Also see System Administrator on page 2-8 in this glossary.
Voice Mail
System Re-
initialization
Re-initializing VM8000 InMail returns all programmed options to
default value.
Maintenance
Time and Date After listening to a message, an extension user can dial a code to
hear what time the message was sent.
Also see Auto Time Stamp on page 2-2 in this glossary.
Voice Mail
Time and Date
Stamp
With caller ID installed, an extension user can listen to a message
and dial a code to hear the time the message was sent, as well as the
caller’s number.
Also see Caller ID with Return Call on page 2-3 and Time and Date in
this glossary.
Voice Mail
Feature Name Description Usage
To Next Page
Loading...
