Pixie service manual
19
OPERATION
4.4.2 Resetting the fill up level and auto shut off
With the following procedure all programmed fill up levels will be set back to this factory
settings:
Coffee button "small cup" / "Espresso" .................................................................. 40 ml
Coffee button "large cup" / "Lungo"...................................................................... 110 ml
Additionally the auto shut off time will be set back to 9 min (factory setting).
4.5 Empty water system
After every operation, some water (max. 25 ml) remains in the coffee machine. There-
fore the water system must be emptied
- if the coffee machine will not be used for a long time
- as antifreeze measure
- for repairs and shipment.
1) Switch off the coffee machine. 2) Press and hold the button "large cup".
3) Switch on the coffee machine.
4) Release button "large cup".
1
OFF
2
3
4
ON
After this procedure,
the coffee machine
will not be ready for
approx. 10 min (until the
thermoblock cools to below
100 °C ).
1) Switch off coffee machine. 2) Remove water tank.
3) Place a receptacle under the coffee
outlet.
1
OFF
2
3
To Next Page
Loading...
Need help?
General
