Nespresso Pixie C - Measure Flow Rate

Pixie service manual
68
FUNCTION TESTS
8.3 Measure flow rate
The pressure gauge
adapter must sit
firmly in the capsule
bay.
1) Fill and insert water tank.
2) Open closing handle.
3) Mount pressure gauge adapter (refer
to page 67).
4) Connect pressure hose to pressure
tester.
5) Place a measuring cup under the
drain hose of the pressure tester.
6) Switch on coffee machine.
7) After heating up, press the "large cup"
button.
8) Open the valve until water begins to
flow.
1
2
3
4
5
8
6
7