Pixie service manual
35
REPAIRS
Assembly checkpoints
• Only use the original spare part for replacing the country-specific power cord.
• Adjust power cord lenght to customer’s demand.
• Connect the insulated faston receptacles of neutral (N) and live (L) power cord wires
like shown above.
7.4.4 Remove water guiding
• Open brewing unit with closing handle (9).
• At first push up water guiding (8) and simultaneously pull out latch at the bottom with
the help of a screwdriver.
• Then push down again and remove water guiding (see detail).
Live (L)
Neutral (N)
Protective Earth
9
8