Net.DO Lighting Control Equipment Co.,Ltd http://www.netdo.com.cn
FOX1024s Moving Light Controller. PAGE: 30
Playback Fader is pulled down to bottom.
(Diagram of HTP Time)
LTP Time
LTP Time of Fade In: The time needed for LTP channel value to go from original value to next
value after the Playback Fader is pushed up.
(Diagram of LTP Time)
9.9.1 Edit Fader Time
Path: PROGRAM FadeTime
Enter FadeTime menu, as shown on the right:
Select program by Playback Key, set time by
Cursor Key or Wheel A/B. Range: 0.1s～59m 59s.
Clear the selected item by pressing CLR Time soft key.
Remark: The modification of time doesn’t affect the running program, modified time will be used until the
Playback Fader is pulled down to 0 and pushed up again.
9.10 Fader Synchronization of Playback
Path: PROGRAM FadeSync
Enter FadeSync menu, as shown on the right:
Select program by Playback Key, the following items of
Fader Synchronization can be open/close:
Program No. HTP Time LTP Time
Program No. LTP-Sync SHAPE-Sync
To Next Page
Loading...