Net.Do FOX1024s - 2.3.1 Backboard Plot; 2.3.2 Audio Signal Source

Net.DO Lighting Control Equipment Co.,Ltd http://www.netdo.com.cn
FOX1024s Moving Light Controller. PAGE: 5
2. Installation
2.1 Packing List
FOX1024s moving light controller includes the following items in the carton:
 ONE FOX1024s moving light controller
TIPS: Model and software version could be checked on boot screen.
 ONE power supply cable, ONE user’s manual.
Optional Parts:
USB Disk, 12V Gooseneck Work Lamp;
2.2 Safety Caution
 The controller must be connected with the protective groundwire!
 No liquid into the controller!
 Please mind dust and moist!
2.3 Interface and Connection of Controller
2.3.1 Backboard Plot
DMX512 Output Audio Input MIDI (out/in) Power Input Lamp Fuse Power Switch
2.3.2 Audio Signal Source
 Audio signal can be taken from mixer controller, line level output of other
audio equipments, or MIC input, Controller automatically extracts
low-frequency component from music as music trigger synchronous signal
for Multi-Step Program program.
 One 6.35 mm audio input socket locates on the rear Panel of
controller, the accommodation of input level of audio signal covers
Audio Input -10dB ~ +10dB. When audio device is plugged in, source of sound is line
MIC head level input, when nothing is plugged in, source of sound is MIC selection.