Net.Do FOX1024s - 9.9 Fader Time of Playback; 9.9.1 Edit Fader Time; 9.10 Fader Synchronization of Playback

Net.DO Lighting Control Equipment Co.,Ltd http://www.netdo.com.cn
FOX1024s Moving Light Controller. PAGE: 31
 LTP-Sync
When it is on: LTP channel value will change correspondingly with the Playback Fader pushed
up / pulled down.
(Especially suitable for Pan/Tilt to follow the change of fader)
 SHAPE--Speed Sync
When it is on: Speed of SHAPE in the program will be synchronously controlled by Playback
Fader, it is used for directly controlling of SHAPE speed.
 SHAPE—Size Sync
When it is on: Size of SHAPE in the program will be synchronously controlled by Playback
Fader, it is used for directly controlling of SHAPE size.
10. SCENE
There are totally 2 pages (A / B) for SCENE, up to 20 scenes can be saved in each page. Switch
page by SCENE A / B Function Key, select Scene Number by pressing 1~20 Numeric Key.
10.1 Edit SCENE
 Record Scene:
1) Manual-Run to edit lighting effects; (Superimpose and run multiple saved scenes or playbacks
also can do);
2) Press and hold RECORD  (Select fixtures)  Press Scene Numeric Key to finish recording;
*TIPS: Step in parentheses ( ) can be skipped, if it’s skipped, data of all fixtures will be recorded.
Attribute can also be chosen to record:
Press and hold RECORD  (Select single or multiple attribute by Attribute Key)
 Press Scene Numeric Key to finish recording;
*TIPS: if select attribute, the console will only record the modified data of the selected attribute.
Create scenes for superimposed through this method.
 Delete Scene:
Press and hold DELETE  Press Scene Numeric Key to finish deleting;
 Copy Scene:
Press and hold COPY  Press Scene Numeric Key (source)
 Press another Scene Numeric Key (target);
(The target Scene Numeric Key can be in another page)
 Check Scene:
Press and hold RECORD, the indicator above the Scene Numeric Key will be bright if there is
data saved in it.