E2600 Controller-Drive Tray Installation Guide 7
SAS cables
The SAS cables connect the host to the controller-drive
tray. If you install a drive tray, you must use SAS cables to
connect the controller-drive tray to the drive tray.
Serial cable
This cable is used for support only. You do not need to
connect it during initial installation.
DB9-to-PS2 adapter cable
This cable adapts the DB9 connector on commercially
available serial cables to the PS2 connector on the
controller.
Item
Included with the
Controller-Drive
Tray or Drive Trays
To Next Page
Loading...
Need help?
General
