NetApp HCI User Manual

d. From the System Customization menu, press the down arrow to navigate to Troubleshooting Options,
and press Enter.
e. From the Troubleshooting Mode Options menu, use the up or down arrow to enable ESXi shell and
SSH, which are disabled by default.
f. Press the <Esc> key twice to exit Troubleshooting Options.
g.
Run the smbiosDump command using one of the following options:

NetApp HCI Specifications

General

Product Type	Hyperconverged Infrastructure (HCI)
Data Services	Data protection, encryption
Connectivity	10 GbE, 25 GbE, 40 GbE, 100 GbE
Hypervisor Support	VMware vSphere
Management Node	Included in the solution
Storage Media	SSD and HDD
Node Types	Compute nodes, storage nodes
Storage Protocols	iSCSI
Data Reduction	Deduplication, compression, thin provisioning
High Availability	Built-in redundancy