Virtual Private Networking
109
N300 Wireless ADSL2+ Modem Router DGN2200v3
2. Click Next.
3. Fill in the Connection Name and pre-shared key fields.
The connection name is for convenience and does not affect how the VPN tunnel
functions.
4. Select the radio button for A remote VPN client (single PC), and click Next.
5. Enter the remote IP address and subnet mask, and click Next.
The Summary screen displays:
Note: To view the VPNC-recommended authentication and encryption
settings used by the VPN Wizard, click the here link.
To Next Page
Loading...
Need help?
General
