NETGEAR DGN2200v3 User Manual

Virtual Private Networking
112
N300 Wireless ADSL2+ Modem Router DGN2200v3
3. Configure the security policy in the NETGEAR ProSafe VPN Client software:
a. In the Network Security Policy list, expand the new connection by double-clicking its
name or clicking the + symbol. My Identity and Security Policy subheadings appear
below the connection name.
b. Click the Security Policy subheading to view the Security Policy settings.
Security Policy settings,
Client-to-Gateway A
c. In the Select Phase 1 Negotiation Mode section of the screen, select the Main Mode
radio button.
4. Configure the VPN client identity
.
In this step, you provide information about the remote VPN client PC. You need to provide
the pre-shared key that you configured in the modem router and either a fixed IP address
or a fixed virtual IP address of the VPN client PC.
a. In the Network Security Policy list on the left side of the Security Policy Editor window
,
click My Identity.
b. In the Select Certificate drop-down list, select None.

NETGEAR DGN2200v3 Specifications

General

Brand	NETGEAR
Model	DGN2200v3
Category	Wireless Router
Language	English