Reference Manual for the ProSafe VPN Firewall FVS318v3
VPN Configuration of NETGEAR FVS318v3 E-3
January 2005
Figure E-2: NETGEAR’s VPN Wizard for the router at each gateway (part 1 of 2)
Step 1: Click VPN Wizard on
the Side Menu Bar
Step 2: Enter the following:
o Connection name
o Pre-Shared Key (must be the
same for each end)
o Select “A remote VPN Gateway”
Step 3: Enter the remote WAN’s
IP address
Step 4: Enter the following:
o Remote LAN IP Address
o Remote LAN Subnet Mask
to Figure E-3
To Next Page
Loading...
