NETGEAR GS716T User Manual

114
GS716T and GS724T Gigabit Smart Switches
IGMP Snooping Configuration
Use the IGMP Snooping Configuration page to configure the parameters for IGMP snooping,
which is used to build forwarding lists for multicast traffic.
To access the IGMP Snooping Configuration page, click Switching Multicast  IGMP
Snooping
 IGMP Snooping Configuration.
To configure IGMP Snooping:
1. Enable or disable IGMP Snooping on the switch.
• Enable. The switch snoops all IGMP packets it receives to determine which segments
should receive packets directed to the group address.
• Disable. The switch does not snoop IGMP packets.
2. Choose whether to validate the IGMP IP header.
• Enable. The switch checks the IP header of all IGMP messages for the Router Alert
option. If the option is not present, the packet is dropped.
• Disable. The IGMP IP header is not checked for Router Alert option.
3. Choose whether to block unknown multicast addresses.
• Enable. Packets with unknown multicast MAC address in the destination field will be
dropped.
• Disable. Packets with unknown destination multicast MAC addresses are processed.
4. Click Apply to send the updated configuration to the switch. Configuration changes take
effect immediately.

NETGEAR GS716T Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Stackable	-
Certification	CE, FCC, VCCI, EN, C-Tick, CCC, CSA, UL/cUL, IEC
Product color	Blue
LED indicators	Activity, Link, Power
SFP module slots quantity	2
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	16
Number of VLANs	256
Networking standards	IEEE 802.1D, IEEE 802.1as, IEEE 802.1s, IEEE 802.1v, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 100BASE-T, 1000BASE-T
Noise level	0 dB
Mean time between failures (MTBF)	567680 h
DHCP features	DHCP client
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	14.4 W
MAC address table	16000 entries
Number of static routes	32
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	0 - 90 %
Cables included	AC
Supported network protocols	IP

Weight and Dimensions

Depth	204 mm
Width	440 mm
Height	43 mm
Weight	2570 g