NETGEAR GS716T User Manual

133
GS716T and GS724T Gigabit Smart Switches
MRP Configuration
Use the MRP Configuration page to configure global MRP settings for the switch. To access
the basic MRP Configuration page click the Switching tab, then click MRP  Basic  MRP
Configuration.
To configure the MRP settings:
1. Use the MMRP Mode field to enable or disable MMRP globally on the switch. MMRP
provides an application to register MAC address information. The default mode is
Disable.
2. Use the MSRP Mode field to enable or disable MSRP globally on the switch. MSRP
provides an application to register bandwidth requirement for a given AV stream. The default
mode is Disable.
3. If you enable MSRP, configure the following MSRP settings:
a. Enable or disable MSRP talker pruning. The MSRP talker is the source of an AV
stream. Default mode is Disable.
b. Enable or disable the MRP Periodic State Machine for MSRP on the system. Default
mode is Disable.
c. In the MSRP Max Fan In Ports field, specify the maximum number of the ports
where MSRP registrations are allowed.
d. In the MSRP Max Frame Size field, specify the maximum frame size allowed for an
MSRP frame. The valid range for the frame size is 64–9216 octets.
4. If you enable MMRP, enable or disable the MRP Periodic State Machine for MMRP on the
system. Default mode is Disable. For this setting to take effect, MMRP must be enabled, but
MSRP does not need to be enabled.

NETGEAR GS716T Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Stackable	-
Certification	CE, FCC, VCCI, EN, C-Tick, CCC, CSA, UL/cUL, IEC
Product color	Blue
LED indicators	Activity, Link, Power
SFP module slots quantity	2
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	16
Number of VLANs	256
Networking standards	IEEE 802.1D, IEEE 802.1as, IEEE 802.1s, IEEE 802.1v, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 100BASE-T, 1000BASE-T
Noise level	0 dB
Mean time between failures (MTBF)	567680 h
DHCP features	DHCP client
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	14.4 W
MAC address table	16000 entries
Number of static routes	32
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	0 - 90 %
Cables included	AC
Supported network protocols	IP

Weight and Dimensions

Depth	204 mm
Width	440 mm
Height	43 mm
Weight	2570 g