207
GS716T and GS724T Gigabit Smart Switches
Security MAC Address
Use the Security MAC Address page to convert a dynamically learned MAC address to a
statically locked address.
To display the Security MAC Address page, click Security
Traffic Control, and then click
the Port Security
Security MAC Address link.
To convert learned MAC addresses:
1. Select the Convert Dynamic Address to Static check box.
2. Click Apply. The Dynamic MAC Address entries are converted to Static MAC address
entries in a numerically ascending order until the Static limit is reached.
The Dynamic MAC Address Table shows the MAC addresses and their associated VLANs
learned on the selected port. Use the Port List menu to select the interface for which you
want to display data.
Field Description
VLAN ID Displays the VLAN ID corresponding to the Last Violation MAC address.
MAC Address Displays the MAC addresses learned on a specific port.
Click Refresh to refresh the page with the most current data from the switch.