NETGEAR GS716T User Manual

132
GS716T and GS724T Gigabit Smart Switches
Multiple Registration Protocol Configuration
1
Multiple Registration Protocol (MRP) is a base registration protocol that enables devices
running an MRP application to register attributes to other devices in a network. MRP provides
an application to register attributes such as bandwidth requirement for a given AV stream and
MAC address information. It is used by various applications to propagate the registration.
GS716T and GS724T Smart Switches support the following MRP applications:
• Multiple MAC Reservation Protocol (MMRP)
• Multiple Stream Reservation Protocol (MSRP)
MMRP allows for the propagation MAC address information in the network, and allows for the
registration and deregistration of both individual MAC address information and group MAC
address membership. End stations may request to join or leave a multicast group, or to
register an individual MAC address with a specific VLAN. MAC address entries can be
dynamically registered and deregistered if MMRP is administratively enabled on GS716T and
GS724T Smart Switches.
MSRP reserves necessary resources in the network to facilitate time sensitive traffic to flow
end to end. In a typical network, there are multiple Talkers (those who transmit streams) and
multiple Listeners (those who receive streams from one or many Talkers). Each flow has
specific bandwidth, frame rate, and time sync requirements. With the use of MSRP these
resources are guaranteed through all intermediate devices that are between any talker and
listener.
Note: MRP framework must be available and enabled in all intermediate
devices to ensure that the propagation of the attributes occurs
throughout the network.
With MRP, network attributes are declared, registered, withdrawn, and removed completely
dynamically without any user intervention. This dynamic nature is especially useful in
networks where:
• Network attributes are likely to change frequently, requiring reconfiguration of the
intermediate devices.
• Recipients of these attributes frequently increase or decrease in number.
• Each of these changes without a dynamic self-adjusting framework would require
constant attention from the network administrator.
1. The Multiple Registration Protocol (MRP) feature is available only with a valid license. To activate this feature, you must purchase a license.

NETGEAR GS716T Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Stackable	-
Certification	CE, FCC, VCCI, EN, C-Tick, CCC, CSA, UL/cUL, IEC
Product color	Blue
LED indicators	Activity, Link, Power
SFP module slots quantity	2
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	16
Number of VLANs	256
Networking standards	IEEE 802.1D, IEEE 802.1as, IEEE 802.1s, IEEE 802.1v, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 100BASE-T, 1000BASE-T
Noise level	0 dB
Mean time between failures (MTBF)	567680 h
DHCP features	DHCP client
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	14.4 W
MAC address table	16000 entries
Number of static routes	32
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	0 - 90 %
Cables included	AC
Supported network protocols	IP

Weight and Dimensions

Depth	204 mm
Width	440 mm
Height	43 mm
Weight	2570 g