NETGEAR GS716T User Manual

144
GS716T and GS724T Gigabit Smart Switches
Click Refresh to reload the page.
TSpec Max Frame Size The 32-bit unsigned Bandwidth component is used to allocate
resources and adjust queue selection parameters in order to supply the
quality of service requested by an MSRP Talker Declaration. It
represents the maximum rate, in units of 1024 octets per second, at
which frames in the Stream referenced by the Talker Declaration may
be transmitted.
TSpec Max Interval Frames The 32-bit unsigned Frame Rate component is used to allocate
resources and adjust queue selection parameters in order to supply the
quality of service requested by an MSRP Talker Declaration. It
represents the maximum number of frames that the Talker may
transmit in one second.
Stream VLAN Identifies the VLAN ID of the traffic stream.
Destination MAC Identifies the MAC address of the traffic stream’s destination.
Received Failure Bridge
Interface
Identifies the interface on the Bridge where the failure occurred.
Received Failure Code Identifies the code value of the failure. For more information about the
failure codes, see
Failure Code on page 140.
Received Failure Bridge MAC Identifies the MAC address of the switch where the failure occurred.
Talker Interface Identifies the interface on which the Talker is present.
Listeners Identifies the interface on which Listeners are present.
Field Description

NETGEAR GS716T Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Stackable	-
Certification	CE, FCC, VCCI, EN, C-Tick, CCC, CSA, UL/cUL, IEC
Product color	Blue
LED indicators	Activity, Link, Power
SFP module slots quantity	2
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	16
Number of VLANs	256
Networking standards	IEEE 802.1D, IEEE 802.1as, IEEE 802.1s, IEEE 802.1v, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 100BASE-T, 1000BASE-T
Noise level	0 dB
Mean time between failures (MTBF)	567680 h
DHCP features	DHCP client
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	14.4 W
MAC address table	16000 entries
Number of static routes	32
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	0 - 90 %
Cables included	AC
Supported network protocols	IP

Weight and Dimensions

Depth	204 mm
Width	440 mm
Height	43 mm
Weight	2570 g