NETGEAR GS716T

265
GS716T and GS724T Gigabit Smart Switches
4. Click Apply to send the ping. The switch sends the number of pings specified in the Count
field, and the results are displayed below the configurable data in the Ping area.
• If successful, you will see “Reply From IP/Host: icmp_seq = 0. time = xx usec. Tx = x,
Rx = x Min/Max/Avg RTT = x/x/x msec.”
• If a reply to the ping is not received, you will see “Reply From IP/Host: Destination
Unreachable. Tx = x, Rx = 0 Min/Max/Avg RTT = 0/0/0 msec”.
Ping Success
Message
Ping Unsuccessful
Message