53
GS716T and GS724T Gigabit Smart Switches
To configure or view details about the Green Ethernet feature on a port:
1. Within the Local Device Information, select the port to view or configure from the
Interface menu.
2. Enable or disable the Energy Detect or Short Reach administrative modes on the interface.
3. If you make any changes to the Green Ethernet modes for the port, click Apply.
4. View the additional Green Ethernet information that displays for the port:
Field Description
Cumulative Energy Saved
on this port due to Green
Mode(s) (Watts * Hours)
Shows the energy savings per port, per hour.
Operational Status
(Energy Detect)
Shows the Green Mode operational status, either Inactive or Active.
Reason Shows the Admin status, either Admin Down or Admin Up.
Operational Status
(Short Reach)
Shows the operational status of the port, either Active or Inactive.
Reason Shows the reason why the port is either Active or Inactive.
5. Click Clear to reset the counters on the page to their default values.
6. Click Refresh to update the page with the current information.