NETGEAR Nighthawk R7000P User Manual

12
Use VPN to Access Your Network
You can use OpenVPN software to remotely access your router using virtual private networking (VPN). This
chapter explains how to set up and use VPN access.
The chapter includes the following sections:
• Set Up a VPN Connection on page 126
• Specify VPN Service in the Router on page 126
• Install OpenVPN Software on page 127
• Use a VPN Tunnel on Your Windows Computer on page 132
• Use VPN to Access the Router’s USB Device and Media on page 133
• Use a VPN Tunnel to Access Your Internet Service at Home on page 135
125

NETGEAR Nighthawk R7000P Specifications

General

DSL WAN	No
Ethernet WAN	Yes
3G/4G USB modem compatibility	-
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	2225 Mbit/s
WLAN data transfer rate (first band)	1625 Mbit/s
WLAN data transfer rate (second band)	600 Mbit/s
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	5
Security algorithms	WEP, WPA, WPA2-PSK
Antennas quantity	3
Product type	Tabletop router
Product color	Black
LED indicators	Power
Processor cores	2
Processor frequency	1000 MHz
Power source type	AC

Weight and Dimensions

Depth	184.5 mm
Width	285 mm
Height	50 mm
Weight	750 g