Enable Standard Parental Controls
NETGEAR's standard parental controls is an OpenDNS parental control that let's you to change the web
filtering level for each device on the network. To set up standard parental controls, you must download the
NETGEAR genie app on your mobile device. For more information about NETGEAR's standard parental
controls, visit http://www.netgear.com/lpc.
To enable standard parental controls:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select Parental Controls.
The Parental Controls page displays.
5. Move the slider to the right to enable Standard Parental Controls.
You can only enable one parental controls service.Note
6. Click the Apply button.
7. Download the NETGEAR genie app on your mobile device.
For more information, see http://www.netgear.com/lpc.
8. Launch the NETGEAR genie app.
9. Tap Parental Controls.
Follow the prompts to setup parental controls.
Allow or Block Access to Your Network
You can use access control to block or allow access to your network.
To set up access control:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
Control Access to the Internet
41
Nighthawk AC2300 Smart WiFi Router
To Next Page
Loading...
Need help?
General
Weight and Dimensions
