The Backup Settings page displays.
5. Click the Erase button.
The factory default settings are restored. The user name is admin, the password is password, and the
LAN IP address is 192.168.1.1. DHCP is enabled.
Restore Configuration Settings
To restore configuration settings that you backed up:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net in the address field.
A login window opens.
3. Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Backup Settings.
The Backup Settings page displays.
5. Click the Browse button to find and select the .cfg file.
6. Click the Restore button.
The file is uploaded to the router and the router reboots.
WARNING:
Do not interrupt the reboot process.
Remote Access
You can access your router over the Internet to view or change its settings.You must know the router’s
WAN IP address to use this feature. For information about remote access using Dynamic DNS, see Set Up
and Manage Dynamic DNS on page 105.
Be sure to change the password for the user name admin to a secure password. The
ideal password contains no dictionary words from any language and contains uppercase
and lowercase letters, numbers, and symbols. It can be up to 30 characters. See Change
the admin Password and Enable Password Recovery on page 80.
Note
Manage Your Network
88
Nighthawk AC2300 Smart WiFi Router
To Next Page
Loading...
Need help?
General
Weight and Dimensions
