Use Dynamic QoS to Optimize Internet Traffic Management
Dynamic Quality of Service (QoS) helps improve your router’s Internet traffic management capabilities
through better application and device identification, bandwidth allocation, and traffic prioritization techniques.
Dynamic QoS resolves traffic congestion when the Internet bandwidth is limited and different demands
compete for bandwidth.
Enable Dynamic QoS
Because not everyone uses Dynamic QoS, it is disabled by default.
To enable Dynamic QoS:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select Dynamic QoS.
The Dynamic QoS page displays.
5. Select the Enable Dynamic QoS check box.
6. Specify your Internet bandwidth.
You must specify your Internet bandwidth so that Dynamic QoS can perform bandwidth allocation and
traffic prioritization.
To allow Speedtest to detect your Internet bandwidth (recommended), do the following:
a. For more accurate Speedtest results, make sure that no other devices are accessing the Internet.
b. Click the Speedtest button.
Speedtest determines your Internet bandwidth.
7. Click the Apply button.
Your settings are saved.
A link displays on the bottom of the page to view bandwidth utilization. Clicking the link displays the
Attached Devices page. For more information, see View Devices Currently on the Network on page 85.
Enable or Disable the Automatic QoS Database Update
The router uses a QoS database of the most popular applications and services to implement Dynamic QoS.
By default, the router automatically updates this database.You can turn off this feature and manually update
the database.
Optimize Performance
74
Nighthawk AC2300 Smart WiFi Router
To Next Page
Loading...
Need help?
General
Weight and Dimensions
