User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
8-88 Switching Commands
202-10009-01_060204
Mode Global Config
spanning-tree port mode
This command sets the Administrative Switch Port State for this port to enabled.
Default Disabled
Format spanning-tree port mode
Mode Interface Config
no spanning-tree port mode
This command sets the Administrative Switch Port State for this port to disabled.
Format no spanning-tree port mode
Mode Interface Config
spanning-tree port mode all
This command sets the Administrative Switch Port State for all ports to enabled.
Default Disabled
Format spanning-tree port mode all
Mode Global Config
no spanning-tree port mode all
This command sets the Administrative Switch Port State for all ports to disabled.
Format no spanning-tree port mode all
Mode Global Config
User Account Management Commands
These commands manage user accounts.
To Next Page
Loading...
